Traditional 14mm axle nuts for square tapered bottom brackets.
130 degree lead pipe normally fitted to the front V' brake. Supplied with a rubber gator.
As used on some Ksyrium & All Road wheel sets, these alloy adapters just push into the hollow axle to convert from 12mm bolt through to traditional quick release. Mavic code: V2680301 If you are unsure if these fit your rear axle, please message me with your model & approximate year.
As used on some Crossmax wheel sets, these alloy adapters just push into the hollow axle to convert from 12mm bolt through to traditional quick release. Mavic code: 30873101 Fits into ITS4 axles as fitted to the Crossmax SX If you are unsure if these fit your rear axle, please message me with your model & approximate year.
Generic freehub body that is bolted to the hub using a floating hollow 11mm bolt and takes loose 1/4 ball bearings for the axle cone to run on.
Generic rear hub axle designed for multiple freewheel / derailleur spaced wheels with traditional grip nuts. Axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer. Often used in post 1999 road & mountain bikes.
Generic rear hub axle designed for multiple freewheel / derailleur spaced wheels with traditional grip nuts. This stronger axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer.
Mavic 10mm Rear Axle Adapters for 130 or 135 spacing on a centrelock road wheel Mavic code: B4989801 Adapters for converting rear wheel compatibility
This generic rear axle is designed to be used in conjunction with a quick release skewer and fitted in mountain bikes & hybrid bikes with 135mm rear triangle spacing. The extra 10mm allows 5mm of axle on both sides of the hub to locate properly into the frame drop outs.
This generic rear axle is designed to be used in conjunction with a quick release skewer and fitted in road bikes with 130mm rear triangle spacing. The extra 10mm allows 5mm of axle on both sides of the hub to locate properly into the frame drop outs.