Hub Spares

Filter

Showing 25–36 of 37 results

  • Select options This product has multiple variants. The options may be chosen on the product page

Bicycle Cycle Loose Ball Bearings 3/16 & 1/4 with grease

WELDTITE Packaged Loose Hardened Steel Ball Bearings with grease Available in 2 sizes: Smallest to Biggest: 3/16 Often used in front hubs and old skool BMX headset (4.76mm) 1/4 Often used in open ball bottom brackets and rear hubs (6.35mm)

£3.50
  • Select options This product has multiple variants. The options may be chosen on the product page

9.5mm (3/8) x 175mm Steel Solid Rear Hub Axle

Generic rear hub axle designed for multiple freewheel / derailleur spaced wheels with traditional grip nuts. Axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer. Often used in pre 1999 road & mountain bikes.

£8.50

9.5mm (3/8) x 140mm Chrome Moly Solid Front Hub Axle

Generic oversized front hub axle designed for traditional grip nuts. Axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer.

£7.00

9.0mm x 140mm Chrome Moly Solid Front Hub Axle

Generic front hub axle designed for traditional grip nuts. Axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer.

£7.00

9.0mm x 108mm Hollow Front Hub Axle

Generic front hub axle designed for quick release skewers. Axle is supplied with 2 cones, 2 lock nuts and 4 thin washers

£7.00

8, 9 & 10 speed freehub body with cartridge bearing for Giant & Cannondale hubs

A freehub body that fits to the hub and is then held in place by a captive round collar that take a 14mm allen wrench. The freehub body then fits a 15267 cartridge bearing for the axle to run on.

£44.99

8 / 9 / 10 speed Raleigh Outland RSP Freehub Body for cartridge bearing

8 / 9 / 10 speed Raleigh Outland RSP Freehub Body for 6000 cartridge bearings FHB003 suitable for some sealed bearing hubs, fits Outland sealed hubs Large thread for internal hub bolt

£19.99

8 / 9 / 10 / 11 speed freehub body for Cannondale hubs with cartridge bearing

Generic freehub body that is bolted to the hub using a floating hollow 11mm bolt and takes a 6000 cartridge bearing for the axle to run on.

£44.99

11 speed freehub body for loose ball bearings

Generic freehub body that is bolted to the hub using a floating hollow 11mm bolt and takes loose 1/4 ball bearings for the axle cone to run on.

£39.99

10mm x 175mm Steel Solid Rear Hub Axle

Generic rear hub axle designed for multiple freewheel / derailleur spaced wheels with traditional grip nuts. Axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer. Often used in post 1999 road & mountain bikes.

£6.50

10mm x 175mm Chrome Moly Solid Rear Hub Axle

Generic rear hub axle designed for multiple freewheel / derailleur spaced wheels with traditional grip nuts. This stronger axle is supplied with 2 wheel grip nuts, 2 cones, 2 lock nuts, 2 thin washers and a spacer.

£7.50

10.0mm x 145mm Hollow Mountain Bike & Hybrid Rear Hub Axle

This generic rear axle is designed to be used in conjunction with a quick release skewer and fitted in mountain bikes & hybrid bikes with 135mm rear triangle spacing. The extra 10mm allows 5mm of axle on both sides of the hub to locate properly into the frame drop outs.

£7.00