Shimano TL-FC37 HollowTech II BBR60 Bottom Bracket Socket Fitting Tool Fits onto 1/2 inch driver or torque wrench Fits Shimano Ultegra BB-R60 Bottom Brackets
Shimano TL-FC34 HollowTech II BBR9000 & 9100 Bottom Bracket Socket Fitting Tool Fits onto 1/2 inch driver or torque wrench Fits Shimano Dura Ace BB-R9000 & 9100 Bottom Brackets
Shimano Hollowtech 2 TL-FC25 bottom bracket adapter installation This fits over the smaller road BBR60 cups and similar to up size it to the original size so you can use the TL-FC32 tool and similar
Shimano Hollowtech 2 TL-FC24 bottom bracket adapter installation This fits over the smaller road BBR9000 & BBR9100 cups and similar to up size it to the original size so you can use the TL-FC32 tool and similar
Shimano TL-FC16 Hollowtech 2 crank installation Tool Designed specifically for the removal and installation of HollowTech II chainsets and Bottom brackets Sold individually
Shimano Octalink chainset plug tool TL-FC15 Fits inside the hollow axle so a standard crank extractor can be used to remove the cranks.
Shimano Multiple Freewheel Remover TL-FW30 Designed to fit into their 6 & 7 speed freewheel spline to remove off of a screw on hub. Large spanner or adjustable wrench needed too.
Shimano TL-LR10 Lockring remover for Centre-Lock disc rotors and HG cassettes, socket fit For 1/2 driver or torque wrench. Can use a large spanner or adjustable wrench too.
Shimano HollowTech II Bottom Bracket Spanner TL-FC32 For the original sized cups and the latest BB-R500 Pressed from flat hardened steel.
Shimano HG cassette and Centre-Lock disc remover TL-LR15 Spear located in hollow axle for a firm hold. Doesn't fit all centre-lock locking rings
SHIMANO TL-FC21 CHAINRING BOLT PEG TOOL. This tool is multi functional. On one end it is designed to hold the backing of most chainring bolts. The other end is designed as a peg tool. The pegs are approx. 17mm c-c Then on the flat part of the tool you have an 8mm and 10mm hex spanner for small nut or bolt heads.
Park Tools Spoke Nipple Wrench 0.127 inch / 3.25mm Fits the Crank Bros alloy nipples DT & Sapim brass & alloy nipples Grips 3 sides of the nipple
